Call Us

877-376-9965

Epoxy Flooring Maintenance: Tips and Tricks for a Long-Lasting Finish

There’s nothing more appealing than a new epoxy floor. When searching for options, homeowners and building owners love the durable, smooth look epoxy flooring gives you. However, while epoxy flooring is one of the most durable floors, it also requires maintenance to help maintain its appearance and condition.

Because of epoxy flooring’s non-porous nature, having a coated concrete floor requires less maintenance than a non-coated concrete floor. Maintaining your epoxy floors will depend on the environment and how much dirt has accumulated. The greater the amount of dirt accumulation and the harsher your environment, the more you should clean your epoxy floors.

Epoxy Flooring Maintenance: Tips and Tricks for a Long-Lasting Finish

5 Tips and Tricks to Maintain a Long-Lasting Epoxy Floor

To maximize the life of your epoxy flooring, you should keep a regular maintenance routine. Here are five tips and tricks to help keep your epoxy flooring in good condition. 

1. Sweep, Dust, or Mop Regularly 

When sweeping your floors, this should be done as needed, if possible, with a regular broom or cleaning equipment to prevent any dirt and dust from accumulating. If you’re using cleaning equipment, make sure you’re using equipment with a soft bristle brush. When using stiff brushes, this may scratch the floor, which would affect its gloss.

You can place mats near any entryway to minimize dirt or moisture. After sweeping and dusting, you should mop at least once a week.

2. Scrub Your Floors Regularly

How frequently you scrub your floors ultimately depends on the type of dirt or debris accumulated on your epoxy flooring. However, you should scrub your floors at least once weekly, including high-traffic areas, with a safe brush and cleaner. If you’re in your garage, and there’s an oil spill, you should clean it as soon as it occurs.

3. Spot Clean or Wipe Up Spills

If you have any liquid spills on your epoxy flooring, you’ll want to clean these up immediately before it causes damage or creates a safety hazard. The longer you have harsh liquids on your epoxy flooring, the more likely they will soften, discolor, or remove the epoxy coating. If you have epoxy flooring installed in areas prone to chemical spills, consult a professional for a guide to getting chemical-resistant properties in your epoxy flooring. 

4. Remove Rubber Burns

In areas with epoxy flooring, such as garages or warehouses, vehicle tires, and forklifts may leave rubber burns on your floor’s coating. You can use a citric acid cleaner to remove the rubber burns, then use a stiff brush or scrubber.

It’s important to note that you’ll never want to dispose of waste in storm sewers but in a sanitary sewer, according to your local regulations. After you have scrubbed your epoxy flooring thoroughly, you’ll want to rinse and dry it thoroughly. 

5. Repair Scratches

To maintain your epoxy flooring, you’ll also want to repair any scratches on the floor’s coating as soon as they happen. To minimize scratching, you’ll want to avoid dropping any heavy machinery or sharp objects from being on the floor unless you have proper protection. With the durability of epoxy floors, scratches and other damages happen infrequently. 

To repair any damages to your epoxy flooring, clean the area of any oil or spills, sand any scratches, then feather the edges until they’re smooth. Afterward, you’ll want to rinse your epoxy flooring and let it dry fully and thoroughly. Finally, you will repair the damaged area using the original coating material.

6. Heavy-Duty Cleaning

If your epoxy floors are in a high-trafficked area, your epoxy flooring should receive a heavy-duty cleaning every three to four months. Foam mops are preferred to ensure you aren’t leaving streaks on your floors. It’s also crucial that you use the appropriate cleaner for your flooring.

Using the wrong cleaners when doing your heavy-duty cleaning may affect the shine of your epoxy flooring. Simple Green and Ammonia are two approved cleaning methods on your floors. When doing heavy-duty cleaning, rinse your mop frequently to remove residue.

Should You Recoat Your Epoxy Flooring?

Before deciding to recoat your epoxy floors, it’s essential to inspect them to see if it’s necessary thoroughly. Not all epoxy flooring is recoated or replaced with a new layer. To determine if you should recoat your epoxy floors, you should check for the following.

  • Peeling or bubbling
  • Pulling away from the concrete
  • Excessive wear and tear
  • Unevenness

 

If you need to recoat your epoxy flooring, you should contact a professional. When recoating an epoxy floor, buffing and sanding are required, in addition to filling in cracks if needed. 

This process can be complicated, especially for larger areas. At Jersey Epoxy, however, you won’t need to worry about recoating since our epoxy coating lasts for a long time. Our company also offers extended warranties on all of services. 

Should You Pressure Wash Your Epoxy Flooring?

Using a pressure washer on your epoxy flooring is more harmful than helpful and should be avoided. A harsh spraying tool may limit the ability to remove dirt and debris compared to using a foam mop or water hose. 

Why You Should Choose Jersey Epoxy For Your Epoxy Flooring Needs

When you decide to team up with our professionals at Jersey Epoxy, you’re partnering with a dedicated team. If you’re still wondering how to maintain your epoxy flooring properly, contact our team today to discuss how our services can help bring you the best solutions for all your flooring needs. 

At Jersey Epoxy, we also offer great extended warranties on all of our work. If you’re unsure where to begin regarding maintenance and cleaning, we have you covered!

Contact Jersey Epoxy

If you have any questions or concerns, Contact Jersey Epoxy for your Epoxy flooring needs today. 

Phone Number: 877-376-9965
Email: [email protected]